This Managed 10/100/1000 SFP Media Converters, transparently
connects 10/100/1000 copper to SFP-based multimode or single mode fiber.
The pluggable fiber optics port allows for flexible network
configurations using SFP transceivers supplied by Compufox, Cisco, HP or other manufacturers of MSA compliant SFPs.
While
providing an economical means of extending your existing copper based
network connection, these media converters are SNMP manageable to enable
complete control and status viewing of your fiber links. Compufox 10/100/1000 SFP Managed Media Converters come standard with extensive
cost and time saving features.
Features
- Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3z, IEEE802.3ab, IEEE 802.3x auto-negotiation
- Extends distances ranging from 0.5km (multi-mode fiber) to120km (single mode fiber)
- Wall-Mountable
- Auto-negotiation of duplex(HDX/FDX) on RJ-45 port
- Auto MDI/MDI-X support on RJ-45 port
- Rate Limit function, 64Kbps
- Supporting Loopback, precisely locating the failure,convenient for link test
- Supporting LFP, quickly locates the failure
- Supporting remote power off alarming
- Economical management function within bandwidth
- Supporting Remote management
- Easy installation with complete LED indicators for working situation
- With powerful network management function, supporting WEBand SNMP
Specifications
|
Interface
|
1 x Ethernet port (RJ45) 10/100/1000Base-Tx
1 x GE SFP slot
|
|
Optical Port
|
Wavelength: 850nm / 1310nm / 1490nm / 1550nm
Transfer Distance: up to 80Km
Connectors: LC
|
|
Ethernet Port
|
Available speed: force 100 Mbps, force 1000
Mbps and auto-detective 10/100Mbps Full-Duplex and Half-Duplex
Auto-negotiation
Connectors: RJ-45 Connector; MDI/MDI-X connection auto-sensing
|
|
Standard
|
IEEE802.3（10Base-T）
IEEE802.3u（100Base-TX/FX）
IEEE802.3ab (1000Base-T)
IEEE802.3z (1000Base-SX/LX/CX/T)
IEEE802.3x（Flow control）
SNMP v1/v2c(Simple Network Management Protocol)
|
|
LED Indicators
|
Power Status, Speed Status, FX Link/Act, TX
Link/Act
|
|
Environmental Limits
|
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Operating Humidity: 10% to 90% RH (non-condensing)
Storage Humidity: 5% to 90% RH (non-condensing)
|
|
Agency Approvals
|
FCC Part 15 of Class A & CE approved
|
Applications
1, Managed Ethernet to Fiber Links
Manage
your copper to fiber link with a Managed Standalone Media Converter.
Ideal for use in managed networks with low density fiber applications. A
Managed Standalone Media Converter is connected across a fiber link to a
remote media converter. The copper and fiber link on the managed
standalone unit can provide vital information and status to network
management tools such as SNMP.
2, Connect 10/100 devices to Gigabit Backbone
Devices
on a 10/100 ethernet switch can be connected to a Gigabit backbone
through the use of rate converting 10/100/1000 Media Converters.
